When did you last check your concrete floors? Many homeowners overlook the daily wear and tear on their garage, basement, or patio floors. Cracks, stains, and peeling coatings can quietly appear, turning a once-pristine surface into a costly problem.
Recoating your floor at the right time not only enhances its appearance but also protects it from future damage.
At Excel Concrete Coatings, we see this often. For example, a Waukesha homeowner discovered deep cracks and discoloration in their garage after years of heavy use.
We restored the floor with a durable, stain-resistant coating, leaving it better than new. Here are four key signs that your concrete floor needs recoating.
Visible Cracks and Chips
Cracks and chips do more than make your floor look worn—they signal deeper problems like structural stress, thermal expansion, or heavy traffic damage. Temperature changes cause concrete to expand and contract, while constant foot or vehicle traffic wears down the surface and leads to visible flaws.
- Wisconsin’s freezing and thawing cycles cause concrete to expand and contract, eventually leading to cracks.
- Frequent vehicle use or heavy equipment weakens the surface and causes chips and fractures over time.
- Dropped tools, heavy furniture, or accidental impacts leave lasting marks on your concrete floor.
A homeowner in Waukesha noticed that years of parking their SUV in the garage had caused chips and small cracks in the floor. Concerned the damage would worsen, they contacted us.
Our team applied a high-strength epoxy coating, filled the cracks, and restored the surface’s durability. The floor looked better than new, and the homeowner gained peace of mind knowing it could handle future wear and tear.
- It stops further damage by sealing the surface.
- It strengthens the floor to handle future use.
- It improves the appearance, turning a damaged floor into a smooth, polished surface.
Discoloration and Stains
Concrete floors often lose their appeal over time due to spills, chemicals, and UV exposure. Stains and discoloration not only make your floor unattractive but also indicate that the protective coating has worn down.
Once the coating is compromised, concrete is more vulnerable to absorbing spills, dirt, and other contaminants, leading to long-lasting stains.
A homeowner in Waukesha struggled with years of chemical stains on their basement floor. Regular cleaning didn’t remove the stains, and the floor looked dull and worn.
After a thorough cleaning and recoating process, our team applied a stain-resistant epoxy coating, which not only restored the floor’s original look but also made it easier to clean and maintain. The result was a pristine, durable floor that could withstand future spills and stains.
Peeling or Flaking Coating
When the protective coating on your concrete floor begins to peel or flake, it’s a sign that action is needed to restore its integrity and appearance.
- If the original coating wasn’t applied correctly, it may not adhere properly, leading to peeling and flaking.
- Moisture can seep into the concrete, weakening the bond between the coating and the floor, causing it to peel off.
- Continuous exposure to cleaning chemicals or industrial agents can break down the coating, leading to flaking.
- Professionals agree that improper surface preparation or the use of low-quality coatings are major contributors to peeling. Moisture issues must be addressed before recoating to ensure lasting results.
- A commercial kitchen near Waukesha struggled with significant peeling on their concrete floor due to constant exposure to cleaning chemicals. Our team removed the damaged coating and applied a durable, food-grade finish, specifically designed for heavy traffic and chemical resistance. The new coating restored both the floor’s appearance and its functionality.
Uneven or Rough Texture
A smooth concrete surface is not just about looks—it’s essential for safety and ease of maintenance. An uneven or rough texture often occurs due to wear, poor installation, or the use of low-quality materials.
- Constant foot or vehicle traffic can gradually wear down the concrete, causing an uneven surface.
- If the initial coating was improperly applied, or if the surface wasn’t prepared correctly, it can lead to rough, inconsistent textures.
- Using inexpensive or low-quality materials for coating can result in an uneven finish that deteriorates more quickly.
Pro Tip:
To ensure long-lasting durability and a smooth surface, trust experts for your concrete coating needs. Professional application guarantees a properly prepared surface and the use of high-quality materials, giving you a durable, even texture that is easier to maintain and safer to walk on.
Why Choose Excel Concrete Coatings?
At Excel Concrete Coatings, we’re more than just a coating company—we’re your trusted partners in transforming and protecting your concrete floors. Serving Waukesha and Southeast Wisconsin, we pride ourselves on the following:
- Whether it’s a home garage or a commercial kitchen, we have the expertise to handle all types of concrete flooring needs. We helped a local restaurant in Waukesha restore its damaged floors by applying a food-grade, slip-resistant coating that withstood high foot traffic and harsh cleaning chemicals.
- We use top-tier materials that provide long-lasting protection and enhance the appearance of your concrete floors. A Waukesha homeowner saw significant improvements in their basement after we applied an epoxy coating that not only made the floor look brand new but also protected it against future stains and wear.
- From the first consultation to the final inspection, we are committed to providing exceptional customer service at every step of the process. A business owner praised our team for our responsiveness and clear communication throughout the recoating project, resulting in a smooth and timely process with minimal disruption to their operations.
Your floor might just need a simple cleaning, or it could be time for a full recoat. Either way, Excel Concrete Coatings is here to help.
Call us today at (262)-683-5381 or visit our website to schedule your free consultation. Let us help make your concrete floor look amazing again!
Greg Beebe owns Excel Concrete Coating, a concrete coating company based outside of Milwaukee, Wisconsin.
